ЧП Ворон. Электронные компоненты и радиомонтажное оборудование. Микросхемы, транзисторы, реле, резисторы, конденсаторы, паяльное оборудование, припой.
Корзина пуста!
ВХОД ДЛЯ КЛИЕНТОВ

Забыли пароль?
Зарегистрироваться

УВАГА! Шановні клієнти магазину в м.Дніпро!

З 18.12.23 магазин в м.Дніпро за адресою вул.Новокримська 58 не працює.
Однак, наш інтернет-магазин відкритий для вас 24/7.
Усі місцеві замовлення можуть бути відправлені кур'єрськими службами.




Поиск:

Enter a search string or click on the microphone icon and begin speaking.

×
История запросов
ваша история поиска пуста
Whole catalog Archive
Код товара:
026092

Assembly kit Bulb LED 7W cold light

Complete kit to assemble a simple LED light bulb. E27 base. Power consumption 7W. LEDs 3528 cold glow 11 pcs. Instead of a driver, a circuit with a ballast capacitor is used.
Assembly kit  Bulb LED 7W cold light

Deliveries terminated.



Изображение товара

Product description format_size zoom_out zoom_in

Dimensions: height 103 mm, diameter 61 mm.

To assemble the lamp, you need to solder the capacitors, observing the polarity of the electrolytic capacitor.
Solder the connecting wires to the board and connect the wires to the lamp base.
The base can be glued to the lamp body, but it is best to use a core to make notches along the perimeter of the upper edge of the base, retreating 1.5-2 mm from the edge.
Getinax board is used. All boards are checked and in good working order. Test samples are collected and perform well.

The assembled lamp should not be used outdoors. moisture can enter the housing and damage the lamp.

PRINCIPAL DIAGRAM:
\

Capacitor ratings: C1 = 1.0 μF/400 V; C2 = 47μF/100 V.

Leave your feedback or ask a question

Only this product is discussed here. Off topic comments will be deleted! Please follow the Commenting Rules.

  • WasilySOFT 09:45 14.02.2019 shopping_cartalready bought share

    Получил товар, спасибо!

    правда, вместо 23 светодиодов, 11...

     

    Is the review helpful?
    • Денис (Менеджер интернет-магазина) 12:30 20.02.2019 share

      Добрый день. Да там действительно 11 светодиодов на пластине для 7Вт. Ошибка в описании.

      Is the review helpful?
  • 1 13:26 27.03.2017 shopping_cartalready bought share

    Конденсатор С2 на схеме указано напряжение вообще 400 В, почему такая разница ?

    Is the review helpful?
    • Игорь (Менеджер интернет-магазина) 14:08 27.03.2017 share

      Схема принципиальная, отображает принципы построения. На практике при полностью исправных деталях напряжения гораздо ниже.

      Is the review helpful?
  • 1 23:53 25.03.2017 shopping_cartalready bought share

    Здравствуйте, в описании указан конденсатор С2=47мкФ / 100 В. , по факту 50В. Это нормально? Есть ли фото куда припаять конденсаторы и провода ?  Я не силен в схемах.

    Is the review helpful?
    • Игорь (Менеджер интернет-магазина) 12:52 27.03.2017 share

      На схеме указаны значения напряжений рекомендованные разработчиками. В комплекте от изготовителя те детали, которые есть. реальное напряжение на конденсаторе будет 7*3,3 вольта = 23 вольта. Но когда светодиоды сгорят, напряжение будет достаточным для пробоя конденсатора. ПО цене ремонта - конденсатор заменить проще и дешевле, чем менять светодиоды. Поэтому поставщики не заморачиваются с высоковольтными конденсаторами.

      Is the review helpful?
The data presented in the product description are for reference only and may differ from those indicated by the manufacturer.
To carry out technical calculations and obtain the exact parameters of the goods, use the datasheets from the manufacturer's website.

If you need additional information, or you found an error in the description, or have other questions about this product, then our manager will help you: Денис - Днепр unknown

Buy with this product: Посмотреть больше…