Monoblock design - LED reflector is integrated into the aluminum housing. The angle of inclination of the beam is regulated by the inclination of the entire body relative to the mounting system.
Wide elastic bands with buckles for an individual fit to the head. The ribbons converge on a wide frontal plate. The plate, unlike many other models, is rubber. Does not press or chafe the forehead when worn for a long time.
The battery container is located at the back of the head.
Waterproof housing. Power button at the end of the case, covered with an elastic silicone pad.
The luminous flux is formed by a mirror reflector, without a lens. Focus is not adjustable. This design provides good moisture resistance.
The brightness can be reduced by pressing the power button - the brightness will decrease. The next press on the button will switch the flashlight to strobe mode (blinking). Holding the button pressed for more than 3 seconds will switch the flashlight to SOS mode - giving distress light signals.
The flashlight is powered by one 18650 lithium-ion battery (included). You can charge it either on a third-party charger or directly in the flashlight, for this there is a connector on the power cable between the battery compartment and the head part. The connector is disconnected and a charger is connected to the battery output (not supplied in this version).
You can also use AAA batteries by placing them in the battery cassette.
Features :
-
brand: LOMON
-
model: 3035-2
-
LED: Cree XP-E
-
power: 5W
-
brightness control: yes
-
strobe (flashing): yes
-
SOS distress signal: yes
-
body material: aluminum alloy, plastic
-
food: 1 pc. 18650 battery
-
security: IP65
-
up-down lamp adjustment: yes
-
case dimensions: 60 mm x 30 mm
-
weight (with battery): 200 g
Completeness :
-
lantern - 1 pc
-
battery LOMON WY18650 2200mAh - 1 pc
-
AAA battery cassette - 1 pc.
-
1 x 18650 battery charger