The main feature of the ROBOT-12 charger is an innovative system of intelligent selection and setting of the charging current throughout the entire charging cycle. This frees the user from the need to study the characteristics of the batteries and eliminates possible errors in the regulation of the charging current.
"ROBOT-12" itself regulates the charging current in accordance with the real residual capacity of the battery and its behavior during charging, you just need to select a mode and connect a battery of any capacity - from 1 A * h to 200 A * h!
The charger "ROBOT-12" is intended for charging all types of 12-volt lead-acid storage batteries (AKB):
-
starter (with liquid electrolyte),
-
AGM,
-
gel (GEL),
-
as well as for recovery (desulfation) of batteries with liquid electrolyte, including calcium ones.
Thanks to its efficient charging and desulfation algorithm, ROBOT-12 can also be used:
-
for charging and maintaining in optimal condition batteries operating in a buffer mode (for example, in backup power systems);
-
for long-term storage of batteries.
All operating modes are controlled by a microcontroller and automatically adapt to each specific battery. Each mode includes self-diagnostics of the device, programs for recognizing short-circuited cells and overheating of the battery, determination of incorrect connection.
"ROBOT-12" has small dimensions, weight and price, while meeting the needs of owners of 12-volt lead-acid batteries of almost all types and capacities. Due to these qualities, this device compares favorably with domestic and foreign counterparts.
Main technical characteristics:
-
Supply voltage, V 160 - 245
-
Supply voltage frequency, Hz 50 - 60
-
Maximum power consumption, W 200
-
Maximum charge current, A 12.5
-
Battery capacity, A * h 1 - 200
-
Maximum charge voltage, V:
-
- "GEL" mode 14.4
-
- "AGM" mode 14.9
-
- Starter mode 16.2
-
Types of protection:
-
from polarity reversal;
-
from short circuit;
-
from the high voltage of the network;
-
from overheating
-
Working ambient temperature,°С -20 ... +35
-
Dimensions L * W * H, mm 190*95*70
-
Weight, g 500
Equipment:
-
charger with power cable and battery connection cables - 1 pc
-
instruction - 1 piece
"ROBOT-12" is extremely easy to operate - you just need to connect the ZVU to the battery and select the type of battery.
In addition to the main charging modes, ROBOT-12 implements an algorithm for operating in a buffer mode (for example, as part of a UPS), in which the charger monitors the battery condition around the clock and, when a voltage drop below the threshold level is detected, charges the battery. This mode turns on automatically after the end of the main modes, it can also be called immediately after turning on the "ROBOT", bypassing the main modes.
For a more detailed acquaintance with the work of "ROBOT-12" we recommend that you read/download the instructions.